3S sermas supply services
3S sermas supply services

Optimizing your sawing budget

Circular saw

8 to 20 mm

Band saw

1.1 to 1.6 mm
You wish to:
A SERMAS saw allows you to:
Improve your productivity Reach high cutting rates, up to 70 dm2/min.
Limit your costs in consumables Improve blade lifetime and reduce consumption of lubricants.

Optimize your efficiency ( (percentage of lost material in relation to raw material)

Saw with a blade thickness of 1.1 to 1.6 mm (compared to 8 to 20 mm for a circular saw).
Restrict your labor costs Reach a high level of automation.
Reduce your energy costs Limit the power consumed by the saw.
An example of optimizing a sawing budget:
Do not use comma but point.
average section to cut
m²
number of annual cuts
cuts/year
recycling cost of one ton of chips
$ US
calculation with a circular saw
chips
tons/year
calculation with a band saw
 
chips
tons/year
 
A savings of approximately :
$ US/year
You can use this page to evaluate the impact of a SERMAS INDUSTRIE optimization
on your production budget.

 
Result is calculated in the case of a 20 mm - thick circular blade.
If you wish to have more information, please contact us.
 
Fill the variable fields.
Do not use comma but point.
The figures will be calculated within this page.
The data are not saved or transmitted.
 
The characteristics of your sawing project with SERMAS INDUSTRIE
 The characteristics of your sawing project with SERMAS INDUSTRIE
© 2000 SERMAS INDUSTRIE Le Gît 38210 SAINT QUENTIN SUR ISERE FRANCE
Tel: 33 476 074 242 Fax: 33 476 936 776 E-mail: sermas@sermas.com